Setting Firewall Rules for Outgoing Activity by IPv6 Address

You can filter outgoing activity by IPv6 address from the Dynamic Filtering - Outgoing IPv6 Address Security screen. To reach the screen, select 6. Outgoing IPv6 Addresses from the Work with Dynamic Filtering screen(STRFW > 2 > 5).

​               ​  Dynamic Filtering- Outgoing IPv6 Address Security​                                                                                                   ​  Type options, press Enter.                                                  ​       ​  1=Select  4=Delete  ​                                                                                                            ​  Prfx​                          ​   Opt​  IPv6 Address​                                  ​  Lngh​  FTP​  Text​                   ​   ​  ​  *ALL                                          ​     ​  ​   ​  ​  *ALL TEXT1            ​   ​  ​  12:28::                                       ​  128​  ​   ​  ​  Text2                 ​   ​  ​  13:93:12::                                    ​  128​  ​  L​  ​  text3                 ​   ​  ​  55:66:77:88::                                 ​  128​  ​   ​  ​                        ​   ​  ​  1234:0056:0::                                 ​  128​  ​  Y​  ​                        ​   ​  ​  2001:DB8:0:8::                                ​   64​  ​   ​  ​                        ​   ​  ​  2001:DB8:0:B::                                ​   64​  ​   ​  ​                        ​                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         ​        Bottom​   ​  F3=Exit   F6=Add new  F8=Print  F12=Cancel​                                                                                                                        ​                                                                                                                                                                   ​

The screen shows existing rules for filtering outgoing FTP activity from specific IPv6 address ranges, as shown by the IPv6 Address and Prfx Lngth (Prefix Length) fields. The entry for *ALL shows general rules for incoming activity coming from IPv6 addresses that are not listed.

The FTP column either is blank or shows a letter indicating how Firewall is to filter FTP requests going to that IP Address Range.

• Blank or N: Reject all incoming activity
• S: Allow activity, but do not log this
• Y: Allow activity

The final Text column shows a freeform text description of the rule.

To modify an existing rule, type 1 in the Opt column for that rule and press Enter.

To add a new rule, press the F6 key.